


Product Description
Details
The AKW Tuff Form is an industry-renowned floor former for creating level access wet rooms.
Easy to install, it is suitable for timber or concrete installations, and can be rotated and trimmed to size if required.
Key benefits:
- Creates a complete level access wet room shower area once completed with vinyl flooring or tiled flooring when a tanking kit is also used
- Very strong at only 22mm thick - can withstand loads of up to 381kg (60 stone)
- Suitable for both wooden and screeded floor installations
- Fully recyclable - made from reusable plastic
Installation:
- Unhanded with offset waste position to avoid joists
- Can be cut to length or trimmed to within 150mm of the waste without losing any strength integrity
- Pre-formed fixing holes
- Ribbed design on the underside eliminates slippage or float during installations
Choice of size:
- Please select above as required
Waste options:
AKW TF75 Gravity Waste
- 75mm water seal trapped waste for wet floors
- Universal solvent socket joint for vertical or horizontal outlets
- Made from ABS plastic and nitrile rubber
- Low maintenance and reliable operation
- Bayonet or screw down waste for easy cleaning and rodding
- Tested to BS EN 274 Part 2: 2002
AKW PGTF Pumped Waste
- Pumped waste gully for wet floors
- 15mm horizontal outlet pipe
- 35mm depth below tray
- Low maintenance and reliable operation
- Opens for easy cleaning and rodding
Technical details:
- Thickness (mm): 22
- Waste hole diameter: 160mm
- Load capacity (kg): 381
- Materials: GRP
- European Fire Safety Rating: CFI-s2
Warranty:
- Lifetime manufacturer guarantee
Manufacturer product codes:
- 21000, 21002, 21006, 21008, 21012, 21014, 21018, 21020, 21027, 21028, 21029, 21030, 21036, 21038, 21045, 21046, 21050, 21052
Technical Information
Additional Information
Manufacturer | AKW |
---|---|
VAT Exemption Available | Yes |
Model | AKW Tuff Form |
Floor Former Thickness (mm) | 22 |
For Floor Finish | Vinyl Flooring, Tiled Flooring |
Waste Options | AKW PGTF Pumped Waste, AKW TF75 Gravity Waste |
Optional Waste Type | Gravity Waste, Pumped Waste |
Waste Depth - Outlet Position | No |
Waste Flow Rate | 45 Litres/minute |
Installation and Help Guides
Product Downloads
Product Downloads
Product Downloads
Simply copy this text directly into your tender document...
AKW Tuff Form Wet Room Floor Former - Choice of Size and Waste
Product code: TUFFFORM
AKW Tuff Form floor former for creating level access wet room floors. Choice of size. Can be cut to size. 22mm thick. Unhanded, can be rotated to avoid floor joists. Optional gravity and pumped wastes. Max. load: 381kg (60 stone).
Website: www.heathergorringe.com
Email: service@heathergorringe.com
Tel: 02392755992