Contour Eagle Two 1850x845mm Bath Replacement, Cut to Length, Level Access Alcove Shower Tray with TRUESEAL2

The Contour Eagle TWO is the perfect solution where a bathtub is no longer practical for users with mobility difficulties or requiring wheelchair access.

Once fitted an Eagle TWO tray provides barrier-free, level access in an alcove space (between three walls).

This tray can be cut to length from either end, from 1850mm down to 1500mm, supplied with an end plate to enclose the cut end of the tray allowing you to fit the exact space left by the previous bath.

Key benefits:

• Tray can be cut to length from 1850mm to 1500mm as required
• Barrier free, level access - assists effortless wheelchair entry
• Quick and easy to install
• Anti-slip surface for an assured underfoot grip
• Incorporates Biomaster antibacterial protection

Waste options:

ST90CPB-P-70 Gravity Waste

• 50mm water seal
• 90mm diameter
• 70mm depth
• Flow rate approximately 35 litres per minute
• Manufactured by McAlpine

UPSW-4 Pumped Waste

• To be used in conjunction with a shower waste pump
• Top access, easy to clean
• 22mm outlet
• 110mm chrome plate flange and petal grid fitting
• 32mm depth
• Manufactured by McAlpine

TRUESEAL2 option for vinyl flooring or tiled flooring:

• Can be used with floor tiles by omitting TRUESEAL2
• TRUESEAL2 is a unique profile that allows vinyl flooring to be hot seam welded directly to the tray
• This creates a perfectly secure watertight joint and vastly reduces the chances of future problems
• Please select above if you wish to have TRUESEAL2 fitted onto the tray
• IF YOU DO NOT CHOOSE THIS OPTION DELIVERY WILL TAKE AN ADDITIONAL 5-7 DAYS

Technical details:

• Size (mm): 1850x845
• Max load (kg): 270
• Tray can be trimmed at either end down to 1500mm - 1 x end plate supplied to conceal cut end
• Unhanded - tray has a central waste and three tiling lips for alcove installation (between three walls)
• Manufactured in the UK from Glass fibre-reinforced plastic (GFRP)
• Locate in wooden or solid floors - minimal need for additional support under the tray
• Requires only 18mm of existing floor to be removed (apart from the trap area)
• The 14mm tiling lip is watertight and will easily accommodates wallboards and wall tiles

Warranty:

• Lifetime manufacturer warranty