Contour Falcon 30, Slim 30mm High Level Access or Low Level Shower Tray with Gravity or Pumped Waste - Factory Cut Custom Length 1001 to 1799mm

The Contour Falcon 30 is a slim yet exceptionally strong, self-supporting shower tray.

At 30mm high, the Falcon 30 slimline shower tray is ideal for people who can manage a small step into the shower.

These shallow shower trays address problematic spaces, that can be cut to size, suiting any area where access may be restricted, this tray is supplied factory custom cut between 1001 to 1799mm with the end panel bonded and screwed.

Manufactured using the SMC process from a combination of resin and fibreglass to form a strong and consistent tray with a maximum load of 100 Stone (635kg) across the entire surface area to simulate a standing person.

Supplied with either a gravity or a pumped waste (waste pump not included) and the tray has a Class 'C' anti-slip surface.

Key benefits:

• Can be recessed into the floor if required by 30mm for level access
• Lowest entry, high performance shower tray - only 30mm high
• Falcon 30 shower trays are not handed, the waste position allows for the trap to avoid floor joists
• Self-supporting - rests unsupported on the existing bathroom floor without being bedded down onto a sand and cement mix
• Circular ribbed underside designed for setting into a concrete or screed base and eliminates slippage when installing
• Class 'C' anti-slip surface - the highest achievable classification available (DIN 51097:1992 testing of floor coverings)
• Easy clean finish
• Waste positions situated to allow trap to avoid floor joists
• Reinforced SMC construction to withstand 100 stone / 635kg
• Can be trimmed by up to 300mm - end cap to cover join available, please select above if required
• Unique end cap easily seals and screws securely into place on the underside of the tray to conceal the cut end (see image in gallery)
• Complies to ISO 22196: 2011 international standard for the measurement of antibacterial activity for MRSA on plastic and non-porous surfaces
• Compatible with all Contour WF and Opulence shower doors and screens
• Optional ramp access, order separately - 800 and 1850mm lengths available

Custom option - Specify total length of shower tray in (mm):

• Please enter the total overall length required for the shower tray
• Your shower tray will be factory cut, with the end cap to cover bonded and screwed

Choice of width:

• Please select above as required
• 700 and 800mm tray widths

Waste options:

ST90CPB-P-70 Gravity Waste:

• 1½" outlet
• Flow rate in excess of 35 l/m
• 110mm chrome plated, brass flange and petal grid fitting
• The removable 110mm flange facilitates easy cleaning, key included for easy use
• Top access trap has a removable inner cup
• Manufactured by McAlpine

UPSW-4-22MM Pumped Waste:

• Top access - easy to clean
• To be used in conjunction with a shower waste pump
• 110mm chrome plated flange and petal grid fitting
• Manufactured by McAlpine

Warranty:

• Lifetime manufacturer guarantee

Manufacturer product codes:

• FALC30-900x900, FALC30-1000x1000, FALC30-1300x700, FALC30-1400x800, FALC30-1500x700, FALC30-1800x700, FALC30-1800x800

Please note:

• This custom cut shower tray is non-returnable
• The tray length must be between 1001 to 1799mm
• Ensure accurate dimensions