Granberg Wall Mounted Motorised Sink Module 6300-ESG - Right, Choice of Widths 1190-1590mm

Availability Made to order (Info)
Expected delivery 3-4 weeks
VAT Exemption is available on this product - deducted at Checkout (Info)
Product Code: 6300-ESG-R
Complete wall mounted electric worktop lifting module by Granberg, ESG stainless steel smooth worktop/drying area and right hand one and half bowl shallow depth kitchen sinks, lever tap with swivel spout. White facia front with pre-fitted ALU-design up/down button and key lock. Brushed aluminium rear edge trim. Easy to remove matt white cover panels hide the legs and services below the worktop. Height adjustable range of 300mm. Maximum load 100kg. READ MORE

* Required Fields

 

You may also be interested in...

Granberg Baselift 6300HA Wall Mounted, 103mm Front Height Adjustable Worktop Lift - 590-1000mm

Granberg Baselift 6300HA Wall Mounted, 103mm Front Height Adjustable Worktop Lift - 590-1000mm

Product Code: 6300HA-059100

Ex. VAT: $2,121.50 Inc. VAT: $2,545.80
Granberg Baselift 6300HA Wall Mounted, 103mm Front Height Adjustable Worktop Lift - 1001-1800mm

Granberg Baselift 6300HA Wall Mounted, 103mm Front Height Adjustable Worktop Lift - 1001-1800mm

Product Code: 6300HA-109180

Ex. VAT: $2,463.50 Inc. VAT: $2,956.20

Product Description

Details

Granberg Sink Module 6300-ESGR, a wall mounted electric worktop lift with 300mm of step less height adjustment.

Smooth stainless worktop/drying area with a one and half shallow bowl kitchen sink with overflow to the right. FM Mattsson kitchen monobloc mixer tap with 190mm easy to reach lever and swivel spout.

The underside of the ESG stainless steel worktop/drying area is supported by a fully-glued MDF board.

The ALU-design control button and safety lock will be pre-fitted in the front facia, the rear cover panels are easy to fit and hide the legs and services.

Compatible with any kitchen manufacturer this complete electric worktop lifting system is easy and quick to install with "Plug and Play" electronics and motor systems.

The modules are manufactured 10mm shorter in width, to allow for a 5mm clearance gap at both ends for safe movement, ideal for the direct replacement of 1200 to 1600mm width cabinets. The module has a reduced depth of 15mm to accommodate splashbacks and wall tiles.

The anti-pinch safety strip is located under the front edge of the worktop front facia. If anything touches the strip, the lift unit stops. Side safety strips are available as an optional extra.

This 6300-ESGR sink module is also available with the sink located on the left-hand side. Electric floor standing systems or Manual hand cranked wall mounted variations are also available.

Key benefits:

  • Right hand kitchen sink module with 300mm of motorised height adjustment, 730-1030mm above the floor
  • The wall mounted legs are concealed by 2x matt white sliding cover panels with 2x dark grey coloured steel end plates
  • Tilt able worktop plane for adjustment
  • Full extension drawers can be added, as a factory fitted option - (Contact us if required)
  • Range of widths 1190, 1390 and 1590mm to suit standard kitchen base unit spaces: 1200, 1400 and 1600mm
  • The modules are 10mm shorter in width to allow for a 5mm gap both sides of the unit for the up/down movement
  • Adjustable depth 576-606mm including the Alu. front to suit adjoining cabinets and worktops
  • 100mm free space below the foot of each leg for services
  • Quick solution, top frame supplied pre-assembled for fast site installation
  • Simple 'plug and play' setup for easy motor configuration
  • Granberg corded control button ALU-design 82 x 82 x 17mm, with large easy to use up/down buttons
  • White Powder Coated RAL 9003 aluminium 103mm facia front with plastic end caps
  • The control button and key lock are factory fitted in the facia front in your specified position
  • ESG stainless steel worktop/drying area with one and half 120mm shallow depth sink bowls with overflow and flexible waste kit
  • FM Mattsson kitchen monobloc mixer tap with 190mm easy reach lever and swivel spout that can be adjusted to 60°, 85°, 110°, 360° or fixed
  • All components available separately

Integrated safety system:

  • Anti-pinch safety stop strip located below the front edge of the worktop frame
  • This strip prevents the lift from descending if contact is made
  • Additional side safety stop strips can be added, required if the worktop is situated adjacent to other furniture* or objects like a waste bin
  • *When correctly installed the frames underside from the floor should be 597mm at its lowest and 897mm at the highest point. Entrapment should be prevented with adjoining surfaces

Sink Module 6300-ESG Right includes:

  • Wall mounted motorised 6300 worktop lift with 2x leg motors
  • Control button, ALU-design
  • Safety lock with keys
  • Safety stop system under the front edge of the worktop frame
  • 2x 12mm matt white melamine cover panels hide service installations under the worktop
  • White aluminium front facia
  • Smooth stainless steel worktop and drying area with raised perimeter
  • Brushed aluminium rear edge trim
  • ESG worktop/drying area with one and half 120mm shallow depth sink bowls with dual shallow traps, strainer wastes and a flexible drain hose
  • FM Mattsson Mixer tap with long lever and flexible water hoses

Recommended accessories:

  • Full extension, push-to-open integrated drawers
  • Cutlery trays
  • Power Switch
  • 2 Button multi-compartment frame
  • Kitchen sink heat insulation pads
  • Mini cabinet on wheels

Technical details:

  • Height adjustment: Motor-driven, steplessly adjustable by 300mm (730 - 1030mm)
  • Speed: 30mm / sec.
  • Safety: Security strip, contact with the strip stops the lift
  • Electrical connection: Mains plug for 230 V, max 5.0 A
  • Max. distributed load / Lifting force: 100kg (220lbs)
  • IP-class: IP 20
  • Frame depth: 576 - 606mm from the wall (Incl. front)
  • Tilt able worktop plane for adjustment
  • Front height: 103mm
  • All fittings for assembly supplied wall fixings are not included
  • Space to adjoining wall / cabinet side (mm): 5
  • Space to wall (for tiles): 15mm
  • Tiling: From 700 mm above the floor (alternatively tile down to floor level)
  • Worktop frame Material: Aluminium frame
  • ESG sinks: Smooth 1mm stainless steel sheet
  • Main bowl size: 294mm width x 400mm depth x 120mm deep
  • Rinse bowl size: 220mm width x 400mm depth x 120mm deep
  • Shallow traps, strainer wastes and a flexible waste kit

Stainless steel worktop:

  • Hygienic and wear-resistant drying area
  • Smooth 1mm stainless steel sheet with a raised edge perimeter
  • The underside of the stainless steel worktop is supported by a fully-glued MDF board
  • Overall thickness of worktop: 30mm

Warranty:

  • 2 year manufacturer warranty

Please note:

  • Due to the custom nature of this product, it is made-to-order and is therefore non-returnable
  • Note: The Tap hole is not pre-drilled

Technical Information

Additional Information

Manufacturer Granberg
VAT Exemption Available Yes
Brand - Model Granberg Sink Module
Lifting Force (kg) 100
Method of Operation Electric - Push Button
Height Adjustment (mm) 300
Mounting Wall Mounted

Installation and Help Guides

Product Downloads

Simply copy this text directly into your tender document...

Granberg Wall Mounted Motorised Sink Module 6300-ESG - Right, Choice of Widths 1190-1590mm

Product code: 6300-ESG-R

Complete wall mounted electric worktop lifting module by Granberg, ESG stainless steel smooth worktop/drying area and right hand one and half bowl shallow depth kitchen sinks, lever tap with swivel spout. White facia front with pre-fitted ALU-design up/down button and key lock. Brushed aluminium rear edge trim. Easy to remove matt white cover panels hide the legs and services below the worktop. Height adjustable range of 300mm. Maximum load 100kg.

Website: www.heathergorringe.com
Email: service@heathergorringe.com
Tel: 02392755992

We accept the following payment methods

PayPal
MasterCard
VISA
VISA Debit
BACS
Cheque