
Product Description
Details
A Hydromat internal corner, part of the Hydromat self-adhesive butyl tanking system for wet rooms as supplied with the complete Hydromat tanking 5 and 10m² kits.
Designed for use on the internal corner junction between the floor and walls. Use in conjunction with Hydromat Tanking Membrane and Jointing Tape to create a permanently flexible and waterproof junction.
Once installed it can be tiled over immediately, drastically speeding up the speed of installation.
Key benefits:
- Preformed self-adhesive butyl internal corner
- Double sided to allow for lapping of the tanking membrane and jointing tape
- 120 x 120mm
- Can be tiled over immediately
- Suitable for use with underfloor heating
Installation guidance:
- Check the substrate is sound, free of contaminants and remove any loose material
- Make sure there are no significant irregularities, any gaps should be filled
- Surfaces should be primed (order separately) and allowed to dry
- Roller over all areas for maximum adhesion, before removing the top film
- Seal all edges and junctions with Butyl sealant (order separately)
- Download the PDF installation instructions, from the Installation and Help Guides "Tab" for more information
Also available, order separately:
- 5 and 10m² Hydromat Self-Adhesive Butyl Tanking Membrane rolls
- 10m x 150mm Hydromat Double Sided Self-adhesive Butyl Joint Tape
- Hydromat Double Sided Self-adhesive Butyl External Corners
- 1 Litre primer
- 310ml tube of Butyl Sealant
Warranty:
- When installed correctly by a competent person and used for normal Wetroom applications this tanking system has a life-of-tiling guarantee with the manufacturer (if grout lines are maintained)
- No guarantee is offered where this is not the case
Technical Information
Additional Information
Manufacturer | Hydromat |
---|---|
VAT Exemption Available | No |
Installation and Help Guides
Product Downloads
Product Downloads
Product Downloads
Simply copy this text directly into your tender document...
Hydromat Double Sided Self-adhesive Butyl Internal Corner
Product code: HMIC
Hydromat Internal corner. A self-adhesive preformed butyl internal corner with double sided adhesion. For the internal corner junction between the walls and the floor. Suitable for use with underfloor heating. Can be tiled over immediately.
Website: www.heathergorringe.com
Email: service@heathergorringe.com
Tel: 02392755992