



Product Description
Details
Maxxus linear shower deck kit with 7 to 10m² tanking kit and Purus Living Linear Drain, for tiled floors only.
Available in a range of sizes, the drain can also be customised with a choice of outlet type and grid style.
Key benefits:
- Strong and durable base yet only 22mm thick
- Made from 50% recycled materials and is 100% recyclable
- Solid right through - no pockets or hollow cavities
- Creates a level access floor with no step
- Built-in gradient falls
- 470kg load-bearing deck
- Self-supporting - no requirement for additional support underneath
- May be trimmed down to any size
- Removable sprung NOOD water trap
- The NOOD no-odour water trap which will not allow any foul air to escape even if the gully dries out
- Removable stainless steel tile insert tray and grid options
Installation:
- Suitable for timber and concrete floors
- Fast 1 hour install - laid straight on joists no underboarding needed
- Totally flat underside and recessed screw holes allow for easy fixing
- Simply rotate to place the drain hole in the ideal position
- No release agent to inhibit bonding of adhesives, tanking or membranes
Includes tanking kit:
- 8k bucket - enough to cover between 7 and 10m² in two coats
- Linear drain gasket
- Applied by roller or brush at 90°, tape sandwiched in between
- Apply up wall 500-1000mm and onto floor in wetroom only
- Also includes 1 litre primer, 10m tape, 2x internal corners, 2x pipe collars and a brush
Includes Purus Living Linear drain with three outlets types with Purus NOOD traps:
- 600mm or 800mm lengths depending on the floor former size
- Plastic-bodied unit
- Choice of three gully outlets each with a ABS pipe reducer 2” to 1½” (50mm to 40mm):
- - Low Side Outlet with 30-36 ltr/min flow rate - depth (mm): 52
- - End Parallel Outlet with 60-72 ltr/min flow rate - depth (mm): 105
- - Side Outlet with 60-72 ltr/min flow rate - depth (mm): 105
- Please select above as desired
- Note: Download the correct PDF installation instructions, based on the linear drain length and Tile Insert or Grid
Includes Purus Living Linear drain - Grid options:
- Stainless steel - removable Tile insert tray
- Stainless steel - removable Twist design grid
- Stainless steel - removable Drop design grid
- Please select above as desired
Floor former technical details:
- Thickness (mm): 22
- Max. load (kg): 470
- Material: Vacuum formed GRP
Warranty:
- Maxxus floor formers come with a 25 year manufacturer guarantee
Manufacturer product codes:
- 6821988, 6821987, 6821985, 6821989, 6821986
Technical Information
Additional Information
Manufacturer | Maxxus |
---|---|
VAT Exemption Available | Yes |
Model | Maxxus |
Floor Former Thickness (mm) | 22 |
For Floor Finish | Tiled Flooring |
Waste Options | Purus Linear - End Parallel Outlet, Purus Linear - Low Side Outlet, Purus Linear - Side Outlet |
Optional Waste Type | Gravity Waste |
Waste Depth - Outlet Position | No |
Waste Flow Rate | 30-36 Litres/minute, 60-72 Litres/minute |
Installation and Help Guides
Product Downloads
Product Downloads
Product Downloads
Simply copy this text directly into your tender document...
Maxxus Linear Floor Former with 10m² Tanking Kit, Purus Drain with NOOD Trap and Grid - Choice of Size
Product code: 68219-xx
Maxxus linear floor former. Choice of size. 22mm thick. Includes 7 to 10m² tanking kit. Includes linear drain with choice of outlet and grid options. For tiled floors. Self-supporting 470kg load-bearing deck.
Website: www.heathergorringe.com
Email: service@heathergorringe.com
Tel: 02392755992