

Product Description
Details
Butyl self-adhesive floor drain gasket by Purus, designed for fast installation and improved performance of wet room waterproofing systems with a Maxxus Floor Former when installing a Purus waste with tiled flooring or any wet room floor where a waterproof and flexible joint is required around the waste.
Key benefits:
- 400 x 400mm
- Flexible yet durable material
- Fast installation - can be tiled over immediately
- Fleece top provides maximum key for tile adhesive
- Compatible with any Purus waste
- For tiled floors
How to install:
- Remove the wastes clamping ring. The O-ring in the groove should remain in the gully
- Remove the backing film and apply the gasket, using a roller to ensure good adhesion
- Press down and screw your gulley clamping ring firmly into place using a hand tool
- Once the clamping ring is screwed into place, carefully cut the gasket within the ring with a sharp knife, to the internal perimeter of the waste
Compatible Purus Shower Wastes, to make the hole cutting easier you can also purchase the Purus Reusable Purus Knife 130 (Product Code: 7113605) to cut the waste hole accurately:
- Product Code: 7113764UK - Purus Minimax 50 with Horizontal Outlet and a NOOD no-odour Water Trap
- Product Code: 52719 - Purus Minimax Two Part Wet Floor Waste Gulley with Horizontal Outlet and a NOOD no-odour Water Trap
- Product Code: 7113535UK - Purus Mini Oden 50 Horizontal Outlet with a NOOD no-odour Water Trap
- Product Code: 7113538UK - Purus Mini Brage 110 Vertical Outlet with a NOOD no-odour Water Trap
- Product Code: 7113539UK - Purus Mini Brage 50 Vertical Waste Outlet with a NOOD no-odour Water Trap
Technical Information
Additional Information
Manufacturer | Purus |
---|---|
VAT Exemption Available | Yes |
Installation and Help Guides
Product Downloads
Product Downloads
Product Downloads
Simply copy this text directly into your tender document...
Purus Butyl Self-adhesive Floor Drain Gasket - 400 x 400mm for Tiled Flooring - No Hole
Product code: 70004
Butyl self-adhesive floor drain gasket, without a pre-cut hole. 400x400mm. Manufactured by Purus. Compatible with Purus wet room wastes for tiled wet room floors. Non-setting material for a flexible joint. Fast installation, tileable once installed.
Website: www.heathergorringe.com
Email: service@heathergorringe.com
Tel: 02392755992