Purus Minimax Two Part Wet Floor Waste Gulley with Horizontal Outlet and a NOOD No Odour Water Trap

This Purus gulley has been specifically designed for use with timber floors and floor formers.

It can be plumbed prior to the installation of the floor former, making it Ideal for domestic and commercial wet rooms.

Key benefits:

• Strong - capable of supporting a sustained load of 470 kilos (75 Stone)
• NOOD sprung water trap, prevents foul air escaping. The weight of the water opens the trap
• The NOOD water trap is removable for easy cleaning
• Easy to clean
• 197mm overall diameter
• Overall depth of 89mm
• Horizontal 50mm outlet with pre-fitted 1½" / (40mm) UK adapter solvent welded connector
• Flow rate 48 litres per minute, according to EN 1253

Compatibility:

• Vinyl flooring - The clamping ring retains the vinyl flooring, see PDF installation instructions
• Tiled flooring - The clamping ring retains the Fabric or Butyl Drain Gasket that should be bonded in place as part of your tanking system, see PDF installation instructions
• Can be used with a shower waste pump that has an external flow switch, requires 15mm pipework from the waste outlet

Options:

• Security fixing screws to prevent the removal of the grate - select above if required
• Can be upgraded to a stainless-steel grate - Purus circular grates available separately
• Suitable for tiled flooring with the addition of a Purus Tile Adapter or square stainless-steel grate and drain gaskets - available separately